Qnap Rackmount | TS-877XU-RP | (8 Bay)
Enhanced Performance with TS877XU-RP
The QNAP TS-877XU-RP is a high-performance 2U rackmount NAS designed for intensive workloads and demanding applications. Powered by an Intel Xeon D-1521 4-core processor and 8GB of DDR4 ECC RAM, it delivers exceptional computing power for data-intensive tasks, virtualization, and server applications. The TS-877XU-RP offers abundant I/O capabilities with four 1GbE network ports and two PCIe Gen 3 x4 slots for expanding application potential, supporting various expansion cards like 5/10/25GbE network cards, QM2 cards, and SAS/SATA storage expansion cards. With its 8-bay storage capacity and support for M.2 NVMe SSDs, the TS-877XU-RP provides optimized performance and bandwidth for bandwidth-demanding tasks. The redundant power supply ensures uninterrupted operation in case of power failures, minimizing downtime and protecting critical data.
Key Specifications:
- CPU: Intel Xeon D-1521 4-Core Processor
- RAM: 8GB DDR4 ECC RAM (Expandable to 64GB)
- Networking: 4x 1GbE RJ-45 Ports
- Storage: 8-Bay NAS with Hot-Swappable HDD/SSD Bays
- Expansion: 2x PCIe Gen 3 x4 Slots
- Form Factor: 2U Rackmount
- Redundancy: Redundant Power Supply
Specification
TS-877XU-RP
| CPU | AMD Ryzen™ 5 2600 6-core/12-thread processor, burst up to 3.9 GHz |
| CPU Architecture | 64-bit x86 |
| Floating Point Unit | |
| Encryption Engine | (AES-NI) |
| System Memory | 8 GB UDIMM DDR4 (2 x 4GB) |
| Maximum Memory | 64 GB (4 x 16 GB) |
| Memory Slot | 4 x UDIMM DDR4 |
| Flash Memory | 5GB (Dual boot OS protection) |
| Drive Bay | 8 x 3.5-inch SATA 6Gb/s, 3Gb/s |
| Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable | |
| SSD Cache Acceleration Support | |
| GPU pass-through | |
| Gigabit Ethernet Port (RJ45) | 2 |
| 10 Gigabit Ethernet Port | 2 x 10GbE SFP+ SmartNIC port |
| Wake on LAN (WOL) | |
| Jumbo Frame | |
| PCIe Slot | 4 Slot 1: PCIe Gen 3 x4 Slot 2: PCIe Gen 3 x8 or PCIe Gen 3 x4* Slot 3: PCIe Gen 3 x4 Slot 4: PCIe Gen 3 x8 or PCIe Gen 3 x4** *Slot 2 provides the width of PCIe Gen.3 x8 when Slot 1 is not in use, and provides the width of PCIe Gen.3 x4 when Slot 1 is in use.
**Slot 4 provides the width of PCIe Gen.3 x8 when Slot 3 is not in use, and provides the width of PCIe Gen.3 x4 when Slot 3 is in use. Card dimensions for PCIe slot 1：220 x 68.9x 39.08 mm / 8.66 x 2.71 x 1.54 inches. Card dimensions for PCIe slot 2~Slot 4：220 x 68.9x 18.76 mm / 8.66 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used. |
| USB 3.2 Gen 1 port | 4 |
| USB 3.2 Gen 2 (10Gbps) Port | 1 x Type-C USB 3.2 Gen 2 10Gbps 1 x Type-A USB 3.2 Gen 2 10Gbps |
| Form Factor | 2U Rackmount |
| LED Indicators | HDD 1-8, Status, LAN, storage expansion port status |
| Buttons | Power, Reset |
| Dimensions (HxWxD) | 88.6 × 432 × 511.5 mm
Excludes ear hook and the protruding part of the Power Supply Unit.
|
| Weight (Net) | 13.31 kg |
| Weight (Gross) | 15.46 kg |
| Operating Temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 300W (x2), 100-240V |
| Power Consumption: Operating Mode, Typical | 86.04 W
Tested with drives fully populated.
|
| Fan | System fan: 2 x 70mm, 12VDC |
| System Warning | Buzzer |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 3500 |
