Qnap Rackmount | TS-h1886XU-RP-R2 | (12 + 6 Bay)
Enhanced Performance with TS-h1886XU-RP R2
The TS-h1886XU-RP R2 is a 2U rackmount NAS designed for enterprise-level storage and performance. It features a powerful Intel Xeon D-1622 quad-core processor, with 32GB UDIMM DDR4 ECC memory, and a ZFS-based QuTS hero operating system. The NAS offers 18 drive bays (12x 3.5″ SATA and 6x 2.5″ SATA), 10GbE and 2.5GbE connectivity, and dual redundant power supplies for enhanced reliability.
Key Features:
- CPU: Intel Xeon D-1622 quad-core processor
- RAM: 32GB UDIMM DDR4 ECC memory
- Operating System: ZFS-based QuTS hero operating system
- Drive Bays: 18 drive bays (12x 3.5″ SATA and 6x 2.5″ SATA)
- Network: 10GbE and 2.5GbE network connectivity
- Power Supply: Dual redundant power supplies
Specification
Qnap Rackmount TSh1886XU-RP
| CPU | Intel® Xeon® D-1622 4-core processor, burst up to 3.2 GHz |
| CPU Architecture | 64-bit x86 |
| Floating Point Unit | Yes |
| Encryption Engine | Yes(AES-NI) |
| System Memory | 32 GB UDIMM DDR4 ECC (2 x 16GB) |
| Maximum Memory | 128 GB (4 x 32 GB) |
| Memory Slot | 4 x UDIMM DDR4 |
| Flash Memory | 5GB (Dual boot OS protection) |
| Drive Bay | Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s |
| Drive Compatibility | 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA solid state drives2.5-inch bays: 2.5-inch SATA solid state drives |
| Hot-swappable | Yes |
| SSD Cache Acceleration Support | Yes |
| SR-IOV | Yes |
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 4 (2.5G/1G/100M) |
| 10 Gigabit Ethernet Port | 2 x 10GbE SFP+ SmartNIC port
Pre-installed with a 10GbE PCIe adapter
|
| Wake on LAN (WOL) | Yes |
| Jumbo Frame | Yes |
| PCIe Slot | 3 Slot 1: PCIe Gen 2 x4 (x8 Slot) Slot 2: PCIe Gen 3 x4 Slot 3: PCIe Gen 3 x8 or x4 (x8 Slot) *Slot 3 is preinstalled with a 10GbE network adapter.
**Slot 3 provides the width of PCIe Gen 3 x8 when Slot 2 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 2 is in use. Card dimensions for PCIe slot 1：170 x 68.9 x 39.08 mm / 6.70 x 2.71 x 1.54 inches. Card dimensions for PCIe slot 2：170 x 68.9 x 18.76 mm / 6.70 x 2.71 x 0.74 inches. Card dimensions for PCIe slot 3：170 x 68.9 x 18.76 mm / 6.70 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used. |
| USB 3.2 Gen 1 port | 2 |
| Form Factor | Rackmount |
| LED Indicators | HDD, SSD, Status, LAN, storage expansion port status |
| Buttons | Power, Reset |
| Qnap Rackmount TSh1886XU-RP Dimensions (HxWxD) |
88.6 × 432 × 511.2 mm |
| Weight (Net) | 14.5 kg |
| Weight (Gross) | 18.6 kg |
| Operating Temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 550W(x2), 100-240V |
| Power Consumption: Operating Mode, Typical | 117.92 W
Tested with drives fully populated.
|
| Fan | System fan: 3 x 60mm, 12VDC |
| System Warning | Buzzer |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 10000 |
