Qnap Rackmount
TS-877XU-RP
(8 Bay)

 / Products  / QNAP / SMB - High-End (Rack & Tower) / Qnap Rackmount
TS-877XU-RP
(8 Bay)

Qnap Rackmount
TS-877XU-RP
(8 Bay)

Enhanced Performance with TS877XU-RP

The QNAP TS-877XU-RP is a high-performance 2U rackmount NAS designed for intensive workloads and demanding applications. Powered by an Intel Xeon D-1521 4-core processor and 8GB of DDR4 ECC RAM, it delivers exceptional computing power for data-intensive tasks, virtualization, and server applications. The TS-877XU-RP offers abundant I/O capabilities with four 1GbE network ports and two PCIe Gen 3 x4 slots for expanding application potential, supporting various expansion cards like 5/10/25GbE network cards, QM2 cards, and SAS/SATA storage expansion cards. With its 8-bay storage capacity and support for M.2 NVMe SSDs, the TS-877XU-RP provides optimized performance and bandwidth for bandwidth-demanding tasks. The redundant power supply ensures uninterrupted operation in case of power failures, minimizing downtime and protecting critical data.

Key Specifications:

  • CPU: Intel Xeon D-1521 4-Core Processor
  • RAM: 8GB DDR4 ECC RAM (Expandable to 64GB)
  • Networking: 4x 1GbE RJ-45 Ports
  • Storage: 8-Bay NAS with Hot-Swappable HDD/SSD Bays
  • Expansion: 2x PCIe Gen 3 x4 Slots
  • Form Factor: 2U Rackmount
  • Redundancy: Redundant Power Supply
SKU: TS-877XU-RP Categories: ,

Product Description

TS-877XU-RP

CPU AMD Ryzen™ 5 2600 6-core/12-thread processor, burst up to 3.9 GHz
CPU Architecture 64-bit x86
Floating Point Unit
Encryption Engine  (AES-NI)
System Memory 8 GB UDIMM DDR4 (2 x 4GB)
Maximum Memory 64 GB (4 x 16 GB)
Memory Slot 4 x UDIMM DDR4
Flash Memory 5GB (Dual boot OS protection)
Drive Bay 8 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable
SSD Cache Acceleration Support
GPU pass-through
Gigabit Ethernet Port (RJ45) 2
10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port
Wake on LAN (WOL)
Jumbo Frame
PCIe Slot 4
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x8 or PCIe Gen 3 x4*
Slot 3: PCIe Gen 3 x4
Slot 4: PCIe Gen 3 x8 or PCIe Gen 3 x4**

*Slot 2 provides the width of PCIe Gen.3 x8 when Slot 1 is not in use, and provides the width of PCIe Gen.3 x4 when Slot 1 is in use.
**Slot 4 provides the width of PCIe Gen.3 x8 when Slot 3 is not in use, and provides the width of PCIe Gen.3 x4 when Slot 3 is in use.
Card dimensions for PCIe slot 1：220 x 68.9x 39.08 mm / 8.66 x 2.71 x 1.54 inches.
Card dimensions for PCIe slot 2~Slot 4：220 x 68.9x 18.76 mm / 8.66 x 2.71 x 0.74 inches.
Wider cards can be installed if the next PCIe slot will not be used.
USB 3.2 Gen 1 port 4
USB 3.2 Gen 2 (10Gbps) Port 1 x Type-C USB 3.2 Gen 2 10Gbps
1 x Type-A USB 3.2 Gen 2 10Gbps
Form Factor 2U Rackmount
LED Indicators HDD 1-8, Status, LAN, storage expansion port status
Buttons Power, Reset
Dimensions (HxWxD) 88.6 × 432 × 511.5 mm

Excludes ear hook and the protruding part of the Power Supply Unit.
Weight (Net) 13.31 kg
Weight (Gross) 15.46 kg
Operating Temperature 0 – 40 °C (32°F – 104°F)
Storage Temperature -20 – 70°C (-4°F – 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 300W (x2), 100-240V
Power Consumption: Operating Mode, Typical 86.04 W

Tested with drives fully populated.
Fan System fan: 2 x 70mm, 12VDC
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS) – with Max. Memory 3500

Related products